The Baumalight CF572-M450 is a heavy-duty, open-front 72-inch rotary brush cutter attachment built for standard-flow skid steers and engineered to clear dense undergrowth, heavy brush, long grass, and small trees with maximum width and efficiency. The CF572 designation identifies the open-front 72-inch cutting width platform with an 82-inch overall path width — Baumalight's widest open-front skid steer brush cutter in the standard-flow motor range — while the M450 motor configuration optimises it for carriers delivering 15–22 GPM, making it broadly accessible without requiring high-flow hydraulics. The combination of the open-front design and the 4-blade rotor sets the CF572-M450 firmly apart from the closed-front CF372 series: where the CF372 feeds material through a restricted front opening, the CF572's fully open mouth allows the blades to engage tall brush, woody stalks, and saplings directly — guiding them straight into the spinning rotor rather than pushing them over first. Manufactured in Canada and backed by Baumalight's dealer network across North America, the CF572-M450 is the right choice for operators who want maximum standard-flow clearing width with open-front felling capability.

The CF572-M450 is built around the same proven drivetrain architecture used across the entire CF series. A heavy-duty bevel gearbox rated to handle up to 90 HP serves as the final drive, physically isolating the hydraulic motor from the sharp impact forces generated during heavy brush felling and small tree clearing — a fundamental durability advantage over direct-drive designs that transmit those forces straight to the motor. The 4-way rotor assembly carries four hardened AR400 steel slasher blades, each delivering two distinct cuts per pass — the curved leading tip followed immediately by the second — producing up to 52 slashes per second at full operating speed. This sustained cutting intensity rapidly reduces dense vegetation and small-diameter trees to fine mulch in a single forward pass. The double arch push bar funnels tall, heavy brush and standing overgrowth down and underneath the cutter deck directly toward the rotor, keeping material feeding continuously and preventing stalling on large stems during aggressive forward passes.

Safety, debris control, and long-term field reliability are built into every layer of the CF572-M450's design. Heavy-duty link chain curtains are fitted front and rear, with a weld-free curtain rod setup that allows the chain links to flex and absorb high-speed debris impacts without transmitting strain to fixed weld points — significantly extending curtain service life compared to welded alternatives. All hydraulic hoses are protected by Baumalight's standard Hose Armour coiled wrap system, shielding lines from punctures caused by jagged branches and falling debris. A factory-set internal relief valve at 3,000 PSI automatically disengages the driveline if system pressure spikes beyond safe limits, protecting both the carrier and the brush cutter from overload damage. The unit requires a three-hose hydraulic hookup — pressure line, return line, and a mandatory case drain line routed back to the carrier's hydraulic reservoir to protect the motor seals from excess back-pressure damage — and operators must confirm their carrier has this third connection before putting the unit to work.

• 72-Inch Open-Front Cutting Width — 82-Inch Path — The widest open-front skid steer brush cutter in Baumalight's M450 standard-flow range, maximising clearing coverage per pass on open land, fence lines, ditch maintenance, trail development, and construction site vegetation removal.
• Open-Front Design for Direct Brush Engagement — The fully open front guides tall brush, woody stalks, and saplings directly into the spinning blades rather than pushing them over first — significantly more effective on standing vegetation than closed-front models where material must pass through a restricted entry.
• Double Arch Push Bar — Funnels tall, heavy brush and standing overgrowth down and underneath the cutter deck directly toward the rotor, keeping material feeding continuously and preventing stalling on large stems during forward passes.
• M450 Standard-Flow Motor — Optimised for skid steers delivering 15–22 GPM, the M450 brings the full CF572 4-blade open-front platform within reach of standard-flow carriers — no high-flow system required.
• Three-Hose Hookup Required — The M450 motor requires a pressure line, return line, and a mandatory case drain line routed back to the carrier's hydraulic reservoir to protect the motor seals from excess back-pressure; always confirm your carrier has this third connection before ordering.
• 4-Blade Rotor — Up to 52 Slashes Per Second — The 4-way rotor assembly doubles the cutting impacts per revolution compared to 2-blade models, delivering maximum mulching efficiency and throughput through dense, heavy vegetation.
• 90 HP-Rated Bevel Gearbox Drive — Fully decouples the hydraulic motor from cutting impact shocks, dramatically extending motor and gearbox service life compared to conventional direct-drive brush cutter designs.
• Two Cuts Per Blade Pass — The curved cutting tip profile of each AR400 slasher blade delivers two distinct cuts per pass — the leading tip immediately followed by the second — for maximum cutting efficiency per revolution.
• AR400 Reversible Slasher Blades — Crafted from heavy-duty 1/4" AR400 steel, the unique blade profile increases cutting surface area and the reversible design continuously presents a sharp cutting edge, reducing replacement frequency and field downtime.
• Weld-Free Chain Curtain System — Front & Rear — The free-floating weld-free curtain rod setup allows chain links to flex and absorb high-speed debris impacts without transmitting strain to fixed weld points — significantly extending curtain service life over the long term.
• Factory-Set Internal Relief Valve (3,000 PSI) — Automatically disengages the driveline when system pressure exceeds 3,000 PSI, protecting both the carrier's auxiliary hydraulic system and the brush cutter assembly from sudden overload damage.
• Hose Armour Protection — Standard coiled hose wrap encloses all hydraulic lines, shielding them from punctures caused by jagged branches and falling debris during aggressive clearing operations.
• Anti-Binding Blade Mount System — Grade 8 bolts capped with castle nuts and cotter pins secure the blades, while the fully welded collar drops the blade slightly to reduce binding during operation through dense material.
• Universal Skid Steer Mount — Uses the universal skid steer mounting plate for fast, tool-free connection to a wide range of skid steer and compact track loader brands within the supported carrier weight range.
• Anti-Slip Entry Strips — Integrated anti-slip strips on the frame provide extra traction for improved operator safety and ease of entry and exit from the cab.
• Heavy-Duty Output Shaft Shield — Protects the output shaft from impact and contamination caused by debris during brush clearing operations.
• Free Replacement Blade Set Included — Every CF572 ships with a complimentary set of replacement blades secured to the wooden shipping skid — ready for immediate use when the originals wear.
• Locally Available Parts & Right-to-Repair — Designed with industry-standard, non-proprietary components throughout so bearings, seals, and wear parts can be sourced from local suppliers — minimising downtime and long-term maintenance costs.
• Durable Powder-Coated Finish — Heavy-duty construction paired with a durable powder-coated finish for long-term corrosion resistance in demanding outdoor environments.

✔ Authorized Baumalight Dealer
✔ Fast Factory-Direct Shipping
✔ USA-Based Support Team
✔ Secure Payments & Warranty Included
✔ Heavy Equipment Experts
✔ Top-Rated Customer Service

FREE Ground Shipping: 7-10 business days

Shipping times may vary depending on seasonality and product availability. For precise estimated ship date, please contact us at (301) 200-2113 or email support@landbossequipment.com

View our full Shipping Policy