The Baumalight CF372-M650 is a commercial-grade, heavy-duty closed-front rotary brush cutter attachment engineered for high-flow skid steers and built to power through the most demanding vegetation clearing applications. The CF372 platform delivers a 72-inch cutting blade width with an 82-inch overall path footprint — Baumalight's widest closed-front skid steer brush cutter configuration — while the M650 motor designation identifies it as the highest-flow motor option available for this series, designed specifically for carriers delivering 20–40 GPM. This combination makes the CF372-M650 the top-specification choice for operators running large-frame, high-output skid steers who need maximum cutting width and maximum motor power in a single closed-front package. Manufactured in Canada and backed by Baumalight's dealer network across North America, this attachment is built for sustained commercial use across land clearing, trail development, ditch maintenance, construction site preparation, and other high-volume vegetation management applications.

The drivetrain at the core of the CF372-M650 is the same proven bevel gearbox system used across the entire CF series, rated to handle up to 90 HP. Unlike conventional direct-drive designs where every cutting shock transmits directly to the hydraulic motor, the bevel gearbox acts as a mechanical buffer — fully decoupling the motor from the impact forces generated during heavy brush felling and small tree clearing. This isolation is particularly critical at the M650's high-flow operating range, where motor speeds and torque outputs are at their highest. The two hardened AR400 steel slasher blades are mounted using a fully welded collar that drops the blades slightly below the rotor plate, providing the correct spacing to minimise binding during aggressive passes. The curved blade tip profile delivers two distinct cuts per rotation — the leading tip followed immediately by the second — achieving up to 26 slashes per second and reducing dense vegetation and small trees to mulch efficiently in a single forward pass.

The CF372-M650 incorporates the full suite of Baumalight's standard protection and safety systems. Heavy-duty link chain curtains are fitted front and rear as standard on the 300 series, using a weld-free curtain rod design that allows the chains to flex and absorb high-speed debris impacts rather than transmitting stress to fixed weld points — significantly extending curtain service life over the long term. A built-in 3,000 PSI hydraulic relief valve disengages the driveline automatically if system pressure exceeds safe limits, protecting both the carrier and the brush cutter from sudden overload. The M650 configuration requires a three-hose hookup — pressure line, return line, and a mandatory case drain line routed back to the carrier's hydraulic reservoir with a maximum allowable case pressure of 100 PSI. It is also important to note that standard hydraulic quick-disconnect couplers are not included on high-flow M650 configurations and must be sourced separately to match the operator's specific skid steer hydraulic block before the unit can be put to work.

• M650 High-Flow Motor — Top Specification for the CF372 Series — Baumalight's highest-flow motor option for the CF372 platform, optimised for skid steers delivering 20–40 GPM — the right choice for large-frame, high-output carriers that would under-utilise the M450 or M550 configurations.
• 72-Inch Cutting Width — 82-Inch Path — The widest closed-front skid steer brush cutter in Baumalight's CF series, maximising clearing coverage per pass on open land, overgrown fence lines, ditch maintenance, trail development, and construction site vegetation removal.
• Three-Hose Hookup Required — The M650 motor requires a pressure line, return line, and a mandatory case drain line (max 100 PSI case pressure) routed back to the carrier's hydraulic reservoir; always confirm your carrier has this third connection available before ordering.
• Quick-Couplers Not Included — High-flow M650 configurations do not ship with quick-disconnect couplers; operators must source couplers specifically matched to their skid steer's hydraulic block — confirm coupler compatibility before purchase.
• 90 HP-Rated Bevel Gearbox Drive — Fully decouples the hydraulic motor from cutting impact shocks, dramatically extending motor and gearbox service life compared to conventional direct-drive brush cutter designs — especially important at the M650's high-flow operating range.
• Anti-Binding Blade Mount System — The fully welded collar blade mount drops the slasher blades slightly below the rotor plate, providing correct spacing to minimise blade binding during aggressive passes through thick, dense vegetation.
• Two Cuts Per Pass — Up to 26 Slashes Per Second — The curved cutting tips of each AR400 slasher blade deliver two distinct cuts per pass — the leading tip immediately followed by the second — for fast, efficient mulching of dense brush and small-diameter trees.
• AR400 Reversible Slasher Blades — Crafted from 1/4" AR400 steel, the unique blade profile increases cutting surface area and the thin reversible profile continuously presents a sharp cutting edge, reducing replacement frequency and field downtime.
• 2-Way Rotor Assembly — A durable one-piece rotor constructed from a single 3/4" steel plate with a slasher blade on each end, delivering up to 26 slashes per second in the standard 2-blade configuration.
• Closed-Front Design with Dual Chain Curtains — Front and rear heavy-duty link chain curtains with weld-free curtain rods allow the chains to flex and absorb high-speed debris impacts without transmitting strain to fixed weld points — for longer curtain service life.
• Built-In Hydraulic Relief Valve (3,000 PSI) — Standard on all CF series models, the relief valve automatically disengages the driveline when system pressure exceeds 3,000 PSI, protecting both the carrier and the brush cutter from sudden overload damage.
• Hose Armour Protection — Standard coiled hose wrap encloses all hydraulic lines, protecting them from punctures caused by fallen brush, branches, and tree debris during aggressive clearing operations.
• Universal Skid Steer Mount — Uses the universal skid steer mounting plate for fast, tool-free connection to a wide range of skid steer and compact track loader brands within the supported carrier weight range.
• Anti-Slip Entry Strips — Integrated anti-slip strips on the frame body provide extra traction for improved operator safety and ease of entry and exit from the cab when mounting or dismounting the carrier machine.
• Heavy-Duty Output Shaft Shield — Protects the output shaft from impact and contamination caused by debris during brush clearing operations.
• Free Replacement Blade Set Included — Every CF372 ships with a complimentary set of replacement blades secured to the wooden shipping skid — ready for immediate use when the originals wear.
• Industry-Standard, Locally Available Parts — Designed with non-proprietary, industry-standard components throughout so bearings, seals, and wear parts can be sourced from local suppliers — minimising downtime and reducing long-term maintenance costs.
• Durable Powder-Coated Finish — Heavy-duty construction paired with a durable powder-coated finish for long-term corrosion resistance in demanding outdoor environments.

✔ Authorized Baumalight Dealer
✔ Fast Factory-Direct Shipping
✔ USA-Based Support Team
✔ Secure Payments & Warranty Included
✔ Heavy Equipment Experts
✔ Top-Rated Customer Service

FREE Ground Shipping: 7-10 business days

Shipping times may vary depending on seasonality and product availability. For precise estimated ship date, please contact us at (301) 200-2113 or email support@landbossequipment.com

View our full Shipping Policy