The Baumalight CF372-M550 is a heavy-duty, closed-front 72-inch rotary brush cutter attachment engineered for skid steers and compact track loaders running standard-to-medium flow hydraulic systems. The M550 motor configuration is the defining characteristic of this model — a roller-vane hydraulic motor that delivers meaningfully more power output than the entry-level M450 while still operating within the standard-flow range, making it ideal for operators who want commercial-grade clearing performance without upgrading to a high-flow carrier. With a 72-inch cutting width and an 82-inch overall path width, the CF372-M550 covers significantly more ground per pass than the 60-inch CF360 series — reducing clearing time on open land, overgrown fence lines, construction sites, and trail development projects. Manufactured in Canada and backed by Baumalight's dealer network across North America, this attachment is built for operators who demand wider cutting coverage and sustained, reliable performance across long service cycles.

The CF372-M550 is built around the same proven drivetrain architecture that defines the entire CF closed-front series. A heavy-duty bevel gearbox serves as the final drive, physically isolating the hydraulic motor from the direct cutting shocks generated during heavy clearing — a critical durability advantage over conventional direct-drive designs where impact forces transfer straight to the motor. The two reversible AR400 slasher blades are mounted using a fully welded collar that drops the blade slightly below the rotor plate, reducing binding during aggressive felling passes through thick, dense vegetation. The curved cutting tip profile delivers two distinct cuts per blade pass — the leading tip takes the first bite immediately followed by the second — producing up to 26 slashes per second that rapidly reduce brush, weeds, and small-diameter trees to fine mulch in a single forward pass.

Safety, debris control, and long-term field reliability are built into every layer of the CF372-M550's design. Heavy-duty link chain curtains are fitted front and rear as standard on the 300 series, with a weld-free curtain rod setup that allows the chains to flex and absorb high-speed debris impacts without transferring strain to fixed weld points — producing significantly longer curtain service life compared to welded alternatives. A built-in 3,000 PSI hydraulic relief valve disengages the driveline automatically if system pressure spikes beyond safe limits, protecting both the attachment and the carrier from overload damage. The M550 motor requires a three-hose hookup: a pressure line, a return line, and a mandatory case drain line routed back to the carrier's hydraulic reservoir with a maximum allowable case pressure of 100 PSI — operators must confirm their carrier is equipped with this third line before ordering. Baumalight designs the CF372 using industry-standard, non-proprietary components throughout, ensuring that bearings, seals, and wear parts can be sourced from local suppliers rather than relying exclusively on the factory for replacement parts.

• M550 Standard-to-Medium Flow Motor — Delivers greater power output than the M450 while remaining within the standard-flow operating range — enabling commercial-grade clearing performance on carriers that don't have high-flow hydraulics.
• 72-Inch Cutting Width — 82-Inch Path — Wider clearing coverage than the CF360 series, maximising productivity per pass on open land clearing, overgrown fence lines, ditch maintenance, and trail development work.
• Three-Hose Hookup Required — The M550 motor requires a pressure line, return line, and a mandatory case drain line (max 100 PSI case pressure) routed back to the carrier's hydraulic reservoir; always confirm your carrier has this third connection before ordering.
• 90 HP-Rated Bevel Gearbox Drive — Fully decouples the hydraulic motor from cutting impact shocks, dramatically extending motor and gearbox service life compared to conventional direct-drive brush cutter designs.
• Anti-Binding Blade Mount System — The fully welded collar blade mount drops the slasher blades slightly below the rotor plate, providing the correct spacing to minimise blade binding during aggressive passes through thick, dense vegetation.
• Two Cuts Per Pass — Up to 26 Slashes Per Second — The curved cutting tips of each AR400 slasher blade deliver two distinct cuts per pass — the leading tip immediately followed by the second tip — for fast, efficient mulching of dense brush and small-diameter trees.
• AR400 Reversible Slasher Blades — Crafted from 1/4" AR400 steel, the unique blade profile increases cutting surface area and the thin reversible profile continuously presents a sharp cutting edge, reducing replacement frequency and field downtime.
• 2-Way Rotor Assembly — A durable one-piece rotor constructed from a single 3/4" steel plate with a slasher blade on each end, delivering up to 26 slashes per second in the standard 2-blade configuration.
• Closed-Front Design with Dual Chain Curtains — Front and rear heavy-duty link chain curtains with weld-free curtain rods allow the chains to flex and absorb high-speed debris impacts without strain on fixed weld points — for longer curtain service life.
• Built-In Hydraulic Relief Valve (3,000 PSI) — Standard on all CF series models, the relief valve automatically disengages the driveline when system pressure exceeds 3,000 PSI, protecting both the carrier and the brush cutter from sudden overload damage.
• Hose Armour Protection — Standard coiled hose wrap encloses all hydraulic lines, protecting them from punctures caused by fallen brush, branches, and tree debris during aggressive clearing operations.
• Universal Skid Steer Mount — Uses the universal skid steer mounting plate for fast, tool-free connection to a wide range of skid steer and compact track loader brands within the supported carrier weight range.
• Anti-Slip Entry Strips — Integrated anti-slip strips on the frame body provide extra traction for improved safety and ease of entry and exit from the cab when mounting or dismounting the carrier machine.
• Heavy-Duty Output Shaft Shield — Protects the output shaft from impact and contamination caused by debris during brush clearing operations.
• Free Replacement Blade Set Included — Every CF372 ships with a complimentary set of replacement blades secured to the wooden shipping skid — ready for use when the originals wear.
• Industry-Standard, Locally Available Parts — Designed throughout with non-proprietary, industry-standard components so bearings, seals, and wear parts can be sourced from local suppliers — minimising downtime and reducing long-term maintenance costs.
• Durable Powder-Coated Finish — Heavy-duty construction paired with a durable powder-coated finish for long-term corrosion resistance in demanding outdoor environments.

✔ Authorized Baumalight Dealer
✔ Fast Factory-Direct Shipping
✔ USA-Based Support Team
✔ Secure Payments & Warranty Included
✔ Heavy Equipment Experts
✔ Top-Rated Customer Service

FREE Ground Shipping: 7-10 business days

Shipping times may vary depending on seasonality and product availability. For precise estimated ship date, please contact us at (301) 200-2113 or email support@landbossequipment.com

View our full Shipping Policy