The Star Industries LP22A-60BOB Low Profile Dirt Skid Steer Bucket with Bolt-On Blade is the factory bolt-on blade equipped variant of the LP22A-60 — purpose-configured for operators who want maximum cutting edge wear life built in from day one, without the need for a separate blade upgrade after purchase. Sharing the same proven heavy-duty construction, 60" working width, and 15.0 cuft heaped capacity as the LP22A-60, the LP22A-60BOB adds the reversible ⅝" × 8" bolt-on blade to the leading edge at the factory — delivering three times the wear life of a standard punched blade straight out of the box. At 516 lbs — 81 lbs more than the standard blade model — the additional weight reflects the heavier bolt-on blade assembly, and operators who prioritise cutting edge longevity and reduced replacement frequency will immediately appreciate the performance advantage this configuration delivers.

The low-profile design places the bucket bottom close to the ground for superior level back-dragging — a feature that landscaping contractors and grading professionals consistently cite as one of the most practically valuable aspects of the LP22 series. The operator can see the leading edge directly from the seat, providing the visibility and control needed for precise grading, clean back-dragging passes, and accurate material placement. Extra heavy-duty steel construction with fully welded seams — continuous welds inside and outside of all shell seams — provides the structural integrity and long service life that demanding construction, landscaping, and agricultural applications require. The reinforced hat section runs the full width of the bucket top for unyielding upper structure strength, while steel side blades protect the bucket sides from lateral impact and abrasive wear.

Load transfer scuff bars (½" × 3", three to five bars depending on bucket width) reinforce the bucket bottom against excessive wear from ground contact and back-dragging — an especially important feature when the bolt-on blade configuration encourages operators to push the cutting edge harder into grading and levelling work. The universal quick-tach is constructed from 3/8" plate steel to handle the demands of the newest, most powerful skid steer loaders, and integrated safety steps provide secure access to the cab or elevated machine areas. Backed by Star Industries' industry-leading 5-year warranty and proudly made in the USA, the LP22A-60BOB is the low-profile bucket of choice for operators who want maximum blade life and professional-grade durability in a single, ready-to-work package.

• Factory-Installed Reversible ⅝" × 8" Bolt-On Blade — Pre-fitted at the factory for immediate maximum cutting edge performance; reversible design delivers 3 times the wear life of a standard punched blade.
• Low Profile Design for Back-Dragging — Bucket bottom set close to the ground for superior level back-dragging and finish grading — a favourite feature for landscaping and grading professionals.
• Operator Visibility from the Seat — Low-profile design allows the operator to see the leading edge directly from the cab for improved precision, control, and job site safety.
• 15.0 CuFt Heaped Capacity — Generous material volume for efficient loading, hauling, and dumping across construction, landscaping, and agricultural applications.
• Extra Heavy-Duty Steel Construction — Built from heavy-gauge steel throughout for outstanding durability and resistance to impact, abrasion, and structural fatigue.
• Fully Welded Seams — Continuous welds applied inside and outside of all shell seams for maximum structural strength and significantly longer service life.
• Reinforced Hat Section — Full-width hat section across the top of the bucket delivers unyielding strength and rigidity across the entire upper structure under heavy loads.
• Steel Side Blades — Strengthen and protect bucket sides from lateral impact and abrasive wear in rocky, gravelly, and compacted soil environments.
• Load Transfer Scuff Bars (½" × 3") — Three to five heavy-steel scuff bars reinforce the bucket bottom and protect against excessive wear from ground contact and back-dragging operations.
• Bevelled Hard Carbon Steel Punched Blade — Leading edge punched blade (½" × 6" or ¾" × 6") serves as the base for the factory-fitted bolt-on blade upgrade.
• Optional Heavy-Duty Pin-On Teeth — Series 23 pin-on teeth measuring 2¼" across the point for enhanced digging penetration in hard or compacted ground.
• Optional Bolt-On Side Cutters — Protect bucket sides and extend service life in abrasive or rocky soil conditions.
• Universal Quick-Tach (3/8" Plate Steel) — Heavy-duty quick-tach construction handles the demands of the newest and most powerful skid steer loaders with confidence.
• Brand & Model-Specific Bucket Profiles — Designed to match specific skid steer makes and models for correct bucket profile fit and optimal operating performance.
• Integrated Safety Steps — Provide secure and convenient access to the cab or elevated areas of the machine for safer daily operation.
• 5-Year Warranty — Backed by one of the strongest warranties in the skid steer bucket category, reflecting Star Industries' confidence in their USA-made build quality.
• Proudly Made in the USA — Manufactured by Star Industries, a trusted American manufacturer since 1982.

✔ Authorized Star Industries Dealer
✔ Fast Factory-Direct Shipping
✔ USA-Based Support Team
✔ Secure Payments & Warranty Included
✔ Heavy Equipment Experts
✔ Top-Rated Customer Service

FREE Ground Shipping: 7-10 business days

Shipping times may vary depending on seasonality and product availability. For precise estimated ship date, please contact us at (301) 200-2113 or email support@landbossequipment.com

View our full Shipping Policy