The Star Industries LP22A-84 Heavy Duty Skid Steer Bucket is the largest and highest-capacity standard smooth-blade model in the LP22A series — a full 84" wide with a 21.0 cuft heaped capacity and the low-profile design that the entire LP22A range is known for. At seven feet of working width, the LP22A-84 covers more surface per pass than any other standard smooth-blade bucket in the Star Industries heavy-duty skid steer bucket lineup, making it the definitive choice for operators handling the largest material volumes on wide-open construction sites, agricultural fields, and landscaping projects where maximum coverage and back-dragging performance are the top priority. The bevelled hard carbon steel punched blade on the leading edge is factory-ready for the optional reversible ⅝" × 8" bolt-on blade upgrade (3× standard blade wear life), and the bucket is also compatible with optional heavy-duty pin-on Series 23 teeth and optional bolt-on side cutters — giving operators the flexibility to configure the LP22A-84 precisely to their ground conditions and application requirements. Backed by Star Industries' industry-leading 5-year warranty and proudly made in the USA.

At 600 lbs, the LP22A-84 is well-proportioned for its 84" width — reflecting Star Industries' engineering discipline in building maximum-coverage buckets that remain practical and efficient on the full-size skid steer machines they are designed to operate on. The low-profile design keeps the bucket bottom close to the ground for superior level back-dragging — the feature that landscaping and grading professionals consistently cite as the most practically valuable aspect of the LP22A series — while allowing the operator to maintain a direct line of sight to the leading edge from the cab seat for precise material placement and controlled grading passes across the widest possible working width. At 84" wide, a single back-dragging pass covers seven full feet of surface, making finish grading and surface levelling on large landscaping or construction projects faster and more efficient than any narrower bucket in the range can deliver.

Extra heavy-duty steel construction with continuous welds inside and outside of all shell seams, a full-width reinforced hat section providing unyielding upper structure strength, and steel side blades protecting the 84" bucket sides from lateral impact and abrasive wear all combine to deliver the structural integrity that maximum-width, high-cycle skid steer bucket operation demands season after season. Load transfer scuff bars (½" × 3", three to five bars depending on bucket width) reinforce the wide 84" bucket bottom against ground contact and back-dragging wear — critical protection at this working width where bottom wear exposure is at its greatest across the LP22A range. The universal quick-tach is constructed from 3/8" plate steel to handle the newest, most powerful skid steer loaders, and every LP22A bucket is designed to match specific machine makes and models for correct profile fit and optimal operating performance. Integrated safety steps complete the package.

• 84" Maximum Working Width — The widest standard smooth-blade model in the LP22A series; seven feet of coverage per pass for the fastest possible wide-area grading, backfilling, and material handling.
• 21.0 CuFt Heaped Capacity — The highest heaped capacity in the LP22A standard blade range for maximum material throughput and the fewest total dump cycles per job.
• Low Profile Design for Back-Dragging — Bucket bottom set close to the ground for superior level back-dragging and precision finish grading — seven feet of surface covered per single pass at 84" width.
• Operator Visibility from the Seat — Low-profile design provides a direct line of sight to the leading edge from the cab for improved precision, control, and job site safety across all applications.
• Extra Heavy-Duty Steel Construction — Built from heavy-gauge steel throughout for outstanding durability and long-term resistance to impact, abrasion, and structural fatigue.
• Fully Welded Seams — Continuous welds applied inside and outside of all shell seams for maximum structural strength and significantly longer service life.
• Reinforced Hat Section — Full-width hat section across the top of the bucket delivers unyielding strength and rigidity across the entire 84" upper structure under heavy loads.
• Steel Side Blades — Strengthen and protect the wide 84" bucket sides from lateral impact and abrasive wear — especially critical at maximum working width.
• Load Transfer Scuff Bars (½" × 3") — Three to five heavy-steel scuff bars reinforce the 84" bucket bottom and protect against excessive wear from ground contact and back-dragging operations.
• Bevelled Hard Carbon Steel Punched Blade — Leading edge blade (½" × 6" or ¾" × 6") is punched and ready for the optional reversible bolt-on blade upgrade for extended cutting edge wear life.
• Optional Reversible ⅝" × 8" Bolt-On Blade — Delivers 3 times the wear life of the standard blade; reversible for even longer service before replacement.
• Optional Heavy-Duty Pin-On Teeth — Series 23 pin-on teeth measuring 2¼" across the point for enhanced digging penetration when ground conditions demand more aggressive cutting capability.
• Optional Bolt-On Side Cutters — Protect the wide bucket sides and extend service life in abrasive or rocky soil conditions — strongly recommended at 84" width.
• Universal Quick-Tach (3/8" Plate Steel) — Heavy-duty quick-tach construction handles the demands of the newest and most powerful skid steer loaders with confidence.
• Brand & Model-Specific Bucket Profiles — Designed to match specific skid steer makes and models for correct bucket profile fit and optimal operating performance.
• Integrated Safety Steps — Provide secure and convenient access to the cab or elevated areas of the machine for safer daily operation.
• 5-Year Warranty — Backed by one of the strongest warranties in the skid steer bucket category, reflecting Star Industries' confidence in their USA-made build quality.
• Proudly Made in the USA — Manufactured by Star Industries, a trusted American manufacturer since 1982.

✔ Authorized Star Industries Dealer
✔ Fast Factory-Direct Shipping
✔ USA-Based Support Team
✔ Secure Payments & Warranty Included
✔ Heavy Equipment Experts
✔ Top-Rated Customer Service

FREE Ground Shipping: 7-10 business days

Shipping times may vary depending on seasonality and product availability. For precise estimated ship date, please contact us at (301) 200-2113 or email support@landbossequipment.com

View our full Shipping Policy