The Star Industries LP22A-78T Low Profile Dirt Skid Steer Bucket with Teeth is the maximum-width toothed variant in the LP22A series — combining the broadest 78" working width and 19.6 cuft heaped capacity in the range with factory-fitted heavy-duty pin-on Series 23 teeth for aggressive digging penetration in hard, compacted, rocky, and root-dense ground conditions. Where the LP22A-78BOB delivers maximum blade life at 78" width, the LP22A-78T delivers maximum ground penetration — making it the definitive choice for operators who need the widest possible toothed bucket for high-production excavation, land clearing, and tough material removal on full-size skid steer machines. At 621 lbs — lighter than the LP22A-78BOB at 673 lbs — the LP22A-78T sits at the crossover point between maximum width and tooth-equipped capability, offering outstanding performance for machines with the lift and hydraulic capacity to operate a 78" toothed bucket at full productivity. Backed by Star Industries' industry-leading 5-year warranty and proudly made in the USA.

The low-profile design keeps the bucket bottom set close to the ground for level back-dragging, ensuring the LP22A-78T remains a capable finish grading and back-dragging tool even with teeth installed — a practical dual-purpose advantage for operators who move between hard digging and finish grading tasks across the same job site. At 78" wide with 19.6 cuft heaped capacity, the toothed LP22A-78T covers the broadest possible surface on every dig cycle, breaking through compacted layers, root masses, and rocky substrates across the full 78" profile — processing more material per cycle than any narrower toothed bucket in the LP22A range. The operator maintains a direct line of sight to the leading edge from the cab seat, providing the visibility and control needed for precise operation even when working in tight grading situations alongside the aggressive digging tasks these teeth are built for.

Extra heavy-duty steel construction with continuous welds inside and outside of all shell seams, a full-width reinforced hat section, and steel side blades protecting the wide 78" bucket sides from lateral impact and abrasive wear deliver the structural durability that maximum-width toothed skid steer bucket operation demands. Load transfer scuff bars (½" × 3", three to five bars) reinforce the wide bucket bottom against the wear generated by toothed ground engagement, ground contact, and back-dragging. The 3/8" plate steel universal quick-tach handles the newest, most powerful skid steer loaders, and each Star Industries LP22A bucket is designed to match specific machine makes and models for correct profile fit. Integrated safety steps, an optional reversible ⅝" × 8" bolt-on blade (3× wear life), and optional bolt-on side cutters round out a fully capable, ready-to-work package for the most demanding 78" toothed skid steer bucket applications.

• Factory-Fitted Heavy-Duty Pin-On Teeth — Series 23 pin-on teeth measuring 2¼" across the point deliver aggressive digging penetration across the full 78" working width in hard, compacted, rocky, and root-dense ground conditions.
• 78" Maximum Working Width — The widest toothed model in the LP22A series; processes the most material per toothed dig cycle for maximum excavation productivity on large job sites.
• 19.6 CuFt Heaped Capacity — Maximum heaped capacity in the LP22A toothed range for the highest material throughput and fewest total dump cycles per job.
• Low Profile Design for Back-Dragging — Bucket bottom set close to the ground for level back-dragging and precision finish grading — usable with teeth installed for versatile dual-purpose operation.
• Operator Visibility from the Seat — Low-profile design provides a direct line of sight to the leading edge from the cab for improved precision, control, and job site safety.
• Extra Heavy-Duty Steel Construction — Built from heavy-gauge steel throughout for outstanding durability and resistance to impact, abrasion, and structural fatigue in demanding conditions.
• Fully Welded Seams — Continuous welds applied inside and outside of all shell seams for maximum structural strength and significantly longer service life.
• Reinforced Hat Section — Full-width hat section across the top of the bucket delivers unyielding strength and rigidity across the entire upper structure under maximum-width heavy loads.
• Steel Side Blades — Strengthen and protect the wide 78" bucket sides from lateral impact and abrasive wear — critical at this maximum working width where side plate exposure is greatest.
• Load Transfer Scuff Bars (½" × 3") — Three to five heavy-steel scuff bars reinforce the 78" bucket bottom and protect against excessive wear from toothed ground engagement and back-dragging.
• Bevelled Hard Carbon Steel Punched Blade — Leading edge punched blade (½" × 6" or ¾" × 6") is punched and ready for the optional reversible bolt-on blade upgrade for extended cutting edge life.
• Optional Reversible ⅝" × 8" Bolt-On Blade — Delivers 3 times the wear life of the standard blade; reversible for even longer service before replacement.
• Optional Bolt-On Side Cutters — Protect the wide bucket sides and extend service life in abrasive or rocky soil conditions — strongly recommended at 78" width.
• Universal Quick-Tach (3/8" Plate Steel) — Heavy-duty quick-tach construction handles the demands of the newest and most powerful skid steer loaders with confidence.
• Brand & Model-Specific Bucket Profiles — Designed to match specific skid steer makes and models for correct bucket profile fit and optimal operating performance.
• Integrated Safety Steps — Provide secure and convenient access to the cab or elevated areas of the machine for safer daily operation.
• 5-Year Warranty — Backed by one of the strongest warranties in the skid steer bucket category, reflecting Star Industries' confidence in their USA-made build quality.
• Proudly Made in the USA — Manufactured by Star Industries, a trusted American manufacturer since 1982.

✔ Authorized Star Industries Dealer
✔ Fast Factory-Direct Shipping
✔ USA-Based Support Team
✔ Secure Payments & Warranty Included
✔ Heavy Equipment Experts
✔ Top-Rated Customer Service

FREE Ground Shipping: 7-10 business days

Shipping times may vary depending on seasonality and product availability. For precise estimated ship date, please contact us at (301) 200-2113 or email support@landbossequipment.com

View our full Shipping Policy