The Star Industries F2X5X72CL3 ITA Replacement Forks are heavy-duty Class 3 clip-mount forklift forks built for demanding warehouse and industrial material handling applications requiring a full 72" fork length, a robust 2" fork thickness, and a rated capacity of 10,000 lbs per pair. Sold as a set of two, these ITA clip-mount forks attach to Class 3 ITA fork carriages via the standardised hook and pin mounting system — the most common carriage interface on mid-to-large warehouse and industrial forklifts — making the F2X5X72CL3 a direct, certified replacement for a broad range of heavy-duty forklift equipment. The 2" thickness and 5" width at 72" length is engineered to manage the significant bending moment generated when handling heavy or deep loads at full fork extension, delivering the rigidity and rated strength that Class 3 operations demand. Available fully tapered and polished by adding the FTP suffix (F2X5X72CL3FTP) for smoother pallet board engagement and reduced load surface damage.

The Star Industries manufacturing process for ITA replacement forks is defined by five uncompromising quality commitments that distinguish them from commodity alternatives in the market. Every fork is forged from a single piece of steel — never fabricated, welded, or assembled from multiple components — then fully heat-treated, quenched, and tempered to achieve a minimum yield strength of 825 MPa throughout the entire fork body. This single-piece forged and heat-treated construction eliminates the structural inconsistencies, weak points, and fatigue failure risks that multi-piece or partially treated forks carry. All welding processes on the production line are certified to ISO 3834-2, and every fork heel and all welds are subjected to full Magnetic Particle Inspection (MPI) crack-testing performed by certificated operatives — providing documented, verifiable assurance that every fork leaving the facility is structurally sound and defect-free.

Full part traceability is permanently stamped onto every fork at the point of manufacture — manufacturer identification, specified capacity and load centre, week of manufacture, and production works order number — providing operators, fleet safety managers, and compliance inspectors with complete accountability at every point across the fork's working life. All Star Industries ITA replacement forks are guaranteed to meet or exceed the requirements of ISO 2328, ISO 2330, and ANSI ITSDF B56.11.4 with respect to mounting details, load, fatigue, and impact performance. For heavy-duty forklift fleet operators requiring certified, traceable Class 3 ITA replacement forks at 72" length, the F2X5X72CL3 is the dependable, standards-compliant professional choice. Proudly manufactured to the highest international safety and quality standards by Star Industries since 1982.

• 10,000 lb Capacity Per Pair — High rated pair capacity for heavy-duty Class 3 forklift applications handling large, heavy, or deep palletised loads.
• 2" Fork Thickness for Class 3 Rigidity — Full 2" thickness provides the structural rigidity and bending strength required for a 72" fork operating at Class 3 capacity under demanding load conditions.
• 5" Fork Width — Wide fork profile distributes load weight effectively across the pallet or load surface for stable, secure handling.
• 72" Fork Length — Extended length ideal for deep load handling, long pallet configurations, and applications where standard-length forks cannot safely reach or support the full load depth.
• Sold as a Set of 2 — Supplied as a matched pair for immediate installation and balanced lift performance.
• Single-Piece Forged Steel Construction — Each fork is forged from one solid piece of steel — no welds, no fabrication joints — eliminating structural weak points for maximum strength and long-term reliability.
• Full Heat Treatment, Quench & Temper — Every fork is fully heat-treated, quenched, and tempered to a minimum yield strength of 825 MPa for consistent, certified structural performance throughout the fork body.
• ISO 3834-2 Certified Welding Processes — All production welding operations are certified to ISO 3834-2 for internationally recognised weld quality and process consistency.
• Full MPI Crack-Testing on All Welds & Heel Area — Every fork undergoes Magnetic Particle Inspection crack-testing on all welds and the critical heel area, performed by certificated operatives for verified, documented defect-free assurance.
• Full Part Traceability — Each fork is stamped with manufacturer ID, specified capacity, load centre, week of manufacture, and production works order number for complete lifecycle accountability.
• ISO 2328 & ISO 2330 Compliant — Guaranteed to meet or exceed international standards for forklift fork mounting details, load, fatigue, and impact testing requirements.
• ANSI ITSDF B56.11.4 Compliant — Meets or exceeds the relevant US national standard for forklift fork safety, performance, and testing requirements.
• ITA / Clip-Mount Design — Standard hook and pin mounting system compatible with Class 3 ITA fork carriages for straightforward installation and replacement.
• Available Fully Tapered & Polished (FTP) — Order as F2X5X72CL3FTP for fully tapered and polished forks offering smoother pallet engagement and reduced pallet board damage.
• Stamped Capacity & Load Centre — Clearly stamped on every fork for on-equipment compliance reference during daily operation and scheduled safety inspections.

✔ Authorized Star Industries Dealer
✔ Fast Factory-Direct Shipping
✔ USA-Based Support Team
✔ Secure Payments & Warranty Included
✔ Heavy Equipment Experts
✔ Top-Rated Customer Service

FREE Ground Shipping: 7-10 business days

Shipping times may vary depending on seasonality and product availability. For precise estimated ship date, please contact us at (301) 200-2113 or email support@landbossequipment.com

View our full Shipping Policy